The regulatory constraints: HACCP and labour law
HACCP (Hazard Analysis Critical Control Point) regulations require, for professional kitchens, impermeable coverings, smooth or lightly textured, resistant to cleaning and disinfecting agents, with no joints inaccessible to cleaning. In practice, that means: no tiling with wide joints, no porous floor.
Labour law imposes minimum anti-slip performance. The German R classification (DIN 51130) is the reference: R9 for low-risk zones, R10 for standard kitchens, R11 for hot wet zones (frying, wash-up), R12 for zones with large quantities of oil.
Finally, public-building fire standards (if your restaurant is a public-access establishment) may impose specific ratings. CB Sols supplies the compliance certificates for your administrative files.
The recommended technical solutions
Heat-welded homogeneous vinyl: this is the absolute benchmark for professional kitchens. Homogeneous vinyl (Gerflor Mipolam Granit, Taralay Premium) is made of a single material throughout its thickness, with no top layer to wear. Heat welding of the joints removes any seepage. Coved skirtings create perfect floor/wall watertightness. Lifespan: 20 to 30 years.
R11/R12 anti-slip tiling with epoxy-resin joints: a solid alternative if you want a tiled look. Epoxy-resin joints are impermeable and acid-resistant. Upkeep is more demanding (cleaning the relief). CB Sols does not lay tiles but can coordinate with your tiler.
Resin floor (epoxy or polyurethane resin): a seamless solution, 100% impermeable, excellent chemical resistance. Ideal for large-area kitchens. Lifespan varies with the quality of the installation. CB Sols does not do resin but can point you to a specialist partner.
The importance of junctions and coved skirtings
The floor alone is not enough to guarantee the watertightness of a professional kitchen. The floor/wall junction is the most critical zone. Without protection, liquids, grease and micro-organisms seep under the covering and into the walls, creating invisible bacterial hotspots.
The professional solution: coved skirtings. The vinyl floor runs 10 to 15 cm up the walls, heat-welded in the corners and at the junction with the equipment (worktop plinth, shower column, drain). This technique creates a watertight envelope.
CB Sols has mastered this technique and forms coved skirtings on all its professional-kitchen projects. The internal and external corners are the trickiest points, and that is where experience makes the difference.
A free, no-obligation quote with a fast reply. Over 28 years of craft near La Rochelle.
Drainage and floor drains
If your kitchen has floor drains (high-pressure wash-down showers), the junction between the vinyl floor and the drain is a critical step. CB Sols forms watertight connecting rings around the drains to prevent any seepage.
If your kitchen has no floor drains but you work with high-pressure cleaning, consider having some installed (plumbing lot) before laying the floor. CB Sols can coordinate the two interventions for an optimal result.
Finally, if your kitchen has a fall towards the drains, the prior levelling compound must respect and slightly accentuate this fall. CB Sols systematically checks the fall when assessing the substrate.
Frequently asked questions
A project in Charente-Maritime?
CB Sols supports you from selection to laying