CB Sols Flooring
CB Sols
Coverings · La Rochelle
Language
FRENES
ServicesFor businessesFor homeownersArchitectsProjectsShowroomBrandsAboutAreas
06 85 05 28 80Free quote
CB Sols→Boat carpet→Barge carpet

Barge carpet,
living aboard and on the river.

Liveaboard barge, restaurant barge or events barge: carpet and marine PVC floors suited to river damp and the public-venue fire rating. 28 years of craft experience, jobs across Charente-Maritime, the Charente and beyond on quotation.

What makes a barge different

« A barge is neither quite a boat nor quite a flat. It is a damp flat that floats. The floor has to bridge those two worlds. »

Valentin Prévoteau, CB Sols
Which part of the barge?

Four spaces, four logics.

01

Saloon & main living space

The heart of a liveaboard barge: wide, open through, sometimes with a wood stove or an open kitchen. The surface is usually flat, the setting-out close to a flat fitting, but with an underlay suited to the damp of the bilge.

02

Cabins & berths

Small surfaces, plenty of angles around the built-in berths. Acoustic comfort is the priority: a barge carries sound from one cabin to the next through the steel hull. A thick carpet, a closed-cell foam underlay.

03

Bathroom & galley

Wet zones. Heat-welded marine PVC flooring, a watertight junction to the walls, no felt. On a barge, condensation is heavy around the waterline: no tolerance for seepage.

04

Commercial barge (restaurant, events)

A special case: the river public-venue fire rating is mandatory, the public is received, use is intensive. Carpet rated Bfl-s1 minimum, a venue safety file to submit to the commission. We support you on the material documentation.

Residential or commercial?

Two uses, two regulatory frameworks.

Residential barge

Like a flat, only damper

Private use, no public reception. A lighter fire framework, but we recommend Bfl-s1 as a precaution. Freedom of materials: polypropylene, treated wool, marine PVC by zone. Acoustic and thermal comfort are the priority. You can fit softer, warmer carpets than on a sea leisure boat, since there is no salt and no roll.

Commercial public-venue barge

Restaurant, function room, floating hotel

The river public-venue fire rating is mandatory: Bfl-s1 minimum, fire test certificates supplied to the safety commission. Intensive use: 1400 g/m² minimum weight, forgiving darker colours. Fitting to be scheduled around the annual closure or a quiet week. We support you on the material file for the venue documentation.

A project in mind?

Residential or public venue, we know both.

Liveaboard barge, restaurant barge, floating hotel: a dockside visit and a material file prepared for the safety commission.

Request a quote06 85 05 28 80
What sets a barge apart

Three differences from sea leisure boating.

No salt, but plenty of fresh water

The river atmosphere is less corrosive than the marine one (no salt), but the damp is just as high. Marine polyurethane adhesives work perfectly, and certain high-end indoor polyurethane adhesives certified for damp resistance can also be used.

Flat surfaces, stable substrates

A fitted-out barge usually has flat surfaces (marine plywood on joists, sometimes a parquet floor). The setting-out is close to a flat job. The upside: faster fabrication, finer finishes possible. The watch-point: test the substrate's moisture before fitting.

No roll, weight not a constraint

A barge at the quay on calm water does not roll. That allows thicker, more comfortable carpets, with a more generous underlay, unthinkable on a sea leisure boat for reasons of weight and behaviour. It is a real gain for the comfort of life aboard.

Materials we fit on barges

Three materials, combined by zone.

1
River polypropylene carpet 1100 g/m²
The liveaboard-barge standard. Impervious to bilge damp, fast-drying after localised seepage, rated Bfl-s1. A wide colour range, a 10-15 year life in residential dockside use.
2
Fire-treated virgin wool
For luxury liveaboard barges on calm water, heated and ventilated. A warm feel, graceful ageing. More sensitive to damp than polypropylene: best kept for truly controlled spaces.
3
Heat-welded marine PVC flooring
Essential in the galley and bathroom. Seams welded at 200°C, full watertightness, hygiene. For a restaurant barge: also in the professional kitchen, with an R10-R11 non-slip rating where there is a wash-up area.
River public-venue regulations

Commercial barge: the safety commission wants certificates.

For a restaurant barge, function room or floating hotel, the river public-venue rating requires full material traceability. Here are the documents the safety commission will ask for, and that we supply in the fitting file.

Bfl-s1 fire test certificate

A fire test report issued by an accredited laboratory (Efectis, LNE) to EN 13501-1. A mandatory document for any floor covering in a public venue. Valid for 5 years, to be renewed at a refurbishment.

Manufacturer data sheet

Product reference, fibre composition, weight, fire rating, use rating (UPEC, ISO durability). It proves the match between the commercial use and the material fitted.

Fitting certificate

A document signed by the fitter certifying that the material was installed in line with the manufacturer's specifications (adhesive, underlay, substrate preparation). The fire test certificate has no value without this attestation.

Ten-year & public liability cover

A certificate of the fitting firm's ten-year (décennale) and professional liability insurance. CB Sols supplies these as standard with the quote for any commercial barge, with no special request.

River substrate preparation

Bilge damp, the floor's first enemy.

Substrate diagnosis

On a fitted-out barge, the existing floor is usually an 18-22 mm marine plywood deck on wooden or metal joists, sometimes a solid parquet on floating panels. First step: a tap survey with a mallet to find the hollow zones (a lifted joist, waterlogged plywood). A hollow zone rebuilt now costs less than a floor that collapses 18 months after fitting.

Residual moisture reading

A capacitive meter over 8 to 15 points per room, tolerance threshold 4% on wood, 2.5% CM on cement screed. Above that: a dehumidifier 48 to 72h before fitting. On an old steel barge, the damp sometimes comes from internal rust in the bottom, calling for a further diagnosis with a marine joiner.

Levelling and screeding

Barge substrates are rarely flat to within 2 mm. A fibre-reinforced self-levelling screed, 3 to 8 mm thick depending on the variation. On an old re-fitted barge, we sometimes build on a raised access-floor system to neutralise the undulations of the steel hull. On difficult substrates, this preparation represents 15 to 25% of the total job budget.

Vapour barrier on critical zones

Above water tanks, bathrooms and machine compartments, we systematically install a 200-micron polyethylene vapour barrier before the underlay. Without it, the damp from the technical compartment rises by capillarity and destroys the carpet within 2-3 years.

« A barge is rarely flat and always damp. A dockside visit is a must before any pricing: without it, you are quoting blind. »

Book an appointmentCharente-Maritime, Charente, Dordogne
Our approach

Five steps, from survey to handover.

01
Dockside survey

A survey of every room, photographs, a moisture reading of the substrate (often marine plywood or board on joists). A diagnosis of any past seepage.

02
Use case

A conversation about use: main residence at the quay, second home, short-term rental, commercial public-venue barge. The regulations change radically between these cases.

03
Quote & documentation

Detailed quote within 48 hours. For river public venues, a material file (fire test certificates, data sheets) is supplied for the safety commission.

04
Workshop fabrication

Cut in our Villedoux workshop from the template. On a barge, surfaces are more regular than on a boat: faster fabrication, but we keep the rigour of marine setting-out.

05
Dockside fitting

Fitted at the quay, with a river-suited polyurethane adhesive and heat-welding for the PVC floors. As the barge is stable (no roll), we work in comfortable conditions close to a flat job.

Frequently asked questions

Barge carpet, technical answers.

What is the difference between a liveaboard barge and a flat?+

Three main differences for the flooring. First, the ambient damp is higher (proximity to the water, condensation), even without salt. Second, the weight carried matters less than on a leisure boat (the barge is permanently at the quay): you can move up in weight and comfort. Third, the substrates are often less flat than a flat: local levelling is frequent, sometimes a full re-level.

Does a residential barge need a specific fire rating?+

For a private residential barge at the quay, the regulations are less strict than for sea leisure (no IMO FTP). We still recommend Bfl-s1 as a safety measure: a fire on a barge is a real risk, and evacuation by a single gangway complicates everything. For a commercial barge (restaurant, function room, hotel), the river public-venue fire rating applies: Bfl-s1 minimum, with supporting documents to submit to the safety commission.

Can you carpet the whole floor of a barge?+

No, and it is a common mistake. The galley and the bathroom must stay in welded marine PVC, watertight. The rest (saloon, cabins, companionways) can be carpeted. This split guarantees the longevity of the whole: carpet does not tolerate standing water, full stop.

How do you manage bilge damp?+

Before any fitting, we check the substrate. If its moisture exceeds 4% (measured with a capacitive meter), we wait or install a vapour barrier. On an old steel barge, internal corrosion sometimes has to be treated before fitting: that is not our trade, but we coordinate with the marine joiner concerned.

How long does fitting out a whole barge take?+

For a 25-30 metre liveaboard barge with 3-4 bedrooms, a saloon, a galley and a bathroom: reckon on 4 to 6 days in the workshop (fabrication) then 3 to 5 days on site. The timing depends heavily on the state of the substrate and on whether the old covering has to be lifted.

Do you also do commercial barges (restaurant, events)?+

Yes. We have worked on restaurant and events barges. The logic changes: public venue, intensive use, safety files, a schedule set around the annual closure or the quiet periods. We supply all the material documentation for the river public-venue file.

Do you work outside Charente-Maritime?+

For a barge, yes: we travel to the Charente, the Dordogne, Aquitaine and as far as the central canals for structured jobs. As a barge is a more predictable site than a boat at sea, the logistics are simpler. Quote on request with the travel costed.

Long-term care

On a barge, damp isn't seen, it's anticipated.

Routine vacuuming and cleaning

Vacuum twice a week on a full-time liveaboard barge. On a restaurant barge, vacuum daily after service with a professional HEPA-filtration vacuum for the reception and dining zones.

Annual hot-water extraction

Hot-water extraction cleaning once a year on a liveaboard barge, twice a year on a restaurant barge. A neutral rinse-free product, forced drying with a fan to avoid any moisture taking hold in the underlay.

Antimicrobial treatment

On a barge moored on calm water over winter (Saintes, Marans, the central canals), a preventive antimicrobial spray treatment every 2 years. It guards against mould forming under the floor, a real risk on insufficiently ventilated wooden substrates.

Watching the wet junctions

An annual visual check of the carpet / welded marine PVC junctions in wet zones (bathroom, galley). A junction that lifts or a seam that whitens signals seepage. A local repair is possible if caught early, a full redo if left to run.

A barge to fit out?

Quote within 48h, venue file included if needed.

Residential, restaurant, events: a dockside visit in Charente-Maritime, the Charente and beyond on quotation.

Request a quote06 85 05 28 80
See also
Boat carpet (hub) →Catamaran carpet →Yacht carpet →Carpet fitting →Bespoke rugs →Villedoux showroom →

Your barge, made new again.

A dockside visit, a quote within 48h. Residential or commercial, with the river public-venue file supported.

Request a quoteShowroom visit
Or 06 85 05 28 80 · contact@cbsols.fr