The upkeep methods
Vacuuming is the basis of daily upkeep. It must be done with a professional high-suction vacuum, preferably with a rotating brush for pile carpets. Recommended frequency: daily in hotel corridors and high-traffic spaces, weekly in offices.
Hot-water-extraction cleaning is the benchmark professional method. A machine injects water and a detergent into the fibres then immediately extracts it all. This method removes deep soiling, allergens and bacteria. It must be carried out by a properly equipped professional.
Spray extraction (carpet shampooing) is a faster but less deeply effective method. It suits intermediate cleaning.
At CB Sols, washing and rinsing are done with demineralised water. Rinsing removes all shampoo residue and leaves the carpet fibres far softer, which makes it easier to vacuum up dirt in the months following the shampoo.
Recommended frequencies by sector
Hotels (bedrooms): daily vacuuming by housekeeping + hot-water extraction 1 to 2 times a year depending on occupancy. Corridors: hot-water extraction 2 to 3 times a year.
Offices: weekly vacuuming + annual hot-water extraction. For a high-traffic open-plan office, hot-water extraction twice a year.
Restaurants and hotels with F&B spaces: monthly hot-water extraction recommended given food splashes.
The mistakes to avoid
Excess moisture is carpet’s number-one enemy. Over-wet cleaning without sufficient drying encourages mould and bad odours. Carpet must be dry within 6 hours of cleaning.
Using unsuitable products can degrade the fibres and the carpet backing. Avoid cleaners based on strong acids or sodium hypochlorite. Use only products recommended by the manufacturer.
Not treating stains immediately is a common mistake. A coffee or wine stain is dealt with in under 5 minutes with a clean towel by absorption (never by rubbing) then a suitable stain remover. After 30 minutes, the stain can become permanent on some fibres.
Caring for a professional vinyl floor
Professional vinyl flooring needs specific upkeep, different from carpet. Daily vacuuming of high-traffic areas (corridors, reception, open-plan) with a professional vacuum and a soft-brush head, to remove the dust and abrasive particles that scratch the surface over time.
Flat damp mopping with lukewarm water and a neutral pH 7-8 detergent, weekly in commercial settings, daily in professional kitchens or healthcare establishments. The kit: a flat mop with a microfibre pad, or a scrubber-dryer for large areas. Systematic rinsing with clean water to avoid sticky residue.
NEVER use solvents, alcohol or neat bleach: these products attack the vinyl plasticisers, make it brittle and stain the surface for good. For heat-welded seams between sheets, a soft brush once a month to dislodge dirt from the groove.
In high-traffic areas (hospital corridors, reception halls), plan a metallising treatment every 2 to 3 years: a polymer emulsion that revives the original look, fills micro-scratches and extends the floor’s life by several years.
A free, no-obligation quote with a fast reply. Over 28 years of craft near La Rochelle.
Caring for bespoke rugs (wool, sisal, seagrass)
Bespoke natural-fibre rugs need care tailored to each fibre, or they can be destroyed in months.
Wool: regular brushing in the direction of the fibres with a soft brush, weekly vacuuming without a rotating brush so the fibres are not broken, an annual dry clean by a professional (absorbent powder then vacuuming). For a stain, act IMMEDIATELY: blot with a clean cloth soaked in cold water, working from the outside in. Never hot water, which fixes the proteins in wool, never bleach or ammonia.
Sisal: dry cleaning ONLY. Sisal does NOT tolerate water: it shrinks, buckles and deforms irreversibly at the slightest significant moisture. Gentle vacuuming without rotation, stain treatment with a specific sisal dry foam, never by wetting.
Seagrass: the most tolerant fibre, it copes with slight ambient humidity (8-12% recommended to keep it supple). Occasional misting with clean water in a very dry area, weekly vacuuming, stain treatment with a wrung-out damp cloth.
Absolute golden rule: NO steam cleaner on natural fibres. Pressurised steam disrupts the fibres and melts the binders of gum-backed rugs.
The 6 mistakes that ruin a floor in 1 year
(1) Solvents or alcohol on a vinyl floor: they attack the plasticisers, the floor becomes brittle and stains irremediably. Consequence: complete replacement within 12 to 18 months when a well-maintained vinyl lasts 20 years.
(2) Neat bleach: discolours vinyl, burns the wool of a carpet or rug, attacks the heat welds of sheet vinyl. It must always be diluted (1 part to 10) and used only occasionally on stubborn stains.
(3) Steam cleaner on seagrass or sisal: the steam disrupts the fibre, the rug buckles and deforms. The damage is immediate and irreversible.
(4) Too much water on a vinyl floor’s seams: water seeps into a badly welded or worn groove, lifts the floor by capillary action, encourages mould under the covering. Flat wrung-out damp mopping, never flooding.
(5) A rotating-brush vacuum on a wool carpet: the brush tears out the fibres, opens the loops, makes it pill in a few weeks. A soft-brush head or a vacuum without rotation is mandatory.
(6) Too long a delay before treating a stain: beyond 2 hours, a wine, coffee, blood or ink stain becomes almost impossible to recover. The right reflex: a stain-remover kit accessible to the whole team, action within 5 to 10 minutes of the incident.
Frequently asked questions
Our solutions made to measure
A project in Charente-Maritime?
CB Sols supports you from selection to laying